https://cdn.gophotonics.com/news/223_638319114906971711.png712370
A research team at the Fraunhofer Institute for Solar Energy Systems ISE has made significant strides in the advancement of solar cell technology. Their groundbreaking work has led to the development of triple-junction solar cells, comprising perovskite-perovskite-silicon subcells, showcasing remarkable efficiency potentials. Funded by the European Commission and the German Federal Ministry for Economic Affairs and Climate Action, the team's latest achievement boasts an open-circuit voltage exceeding 2.8 volts—a record-breaking feat. This milestone underscores the exceptional material properties of the cell, affirming its potential to revolutionize solar energy generation with its efficient architecture.
Traditional silicon solar cells have an open-circuit voltage of between 0.7 and 0.8 volts. “The voltage of over 2.8 volts measured for the perovskite-perovskite-silicon solar cell suggests that the technology is extremely promising for electricity generation,” says Dr. Juliane Borchert, Group Leader for Perovskite-Silicon Technologies at Fraunhofer ISE and at the University of Freiburg. “This is a record value for this type of solar cell and demonstrates how photovoltaics combining perovskite and silicon offers huge untapped potential.”
The performance of a solar cell is determined by three main factors: the open-circuit voltage, short-circuit current and fill factor. Of these, the open-circuit voltage is most strongly influenced by the intrinsic properties of the materials used. The two other factors are heavily dependent on how well the solar cell is implemented into the system. A high voltage therefore indicates that the basic physical characteristics of the solar cell are appropriate and that the fundamental aspects needed for a very efficient solar cell are in place.
Research institutes from around the world have developed perovskite-silicon tandem solar cells with efficiencies greater than 30 percent. In its most recent internal laboratory measurements for a solar cell of this kind, Fraunhofer ISE also recorded an efficiency of 30.0 percent.
“Tandem photovoltaics holds the key to higher efficiencies,” says Prof. Dr. Stefan Glunz, Division Director for Photovoltaics at Fraunhofer ISE. “While we are currently in the process of scaling up the development of perovskite-silicon tandem solar cells and readying them for use in industry in our Pero-Si-SCALE project, it’s also fantastic to see how triple-junction solar cells hold so much potential for advancing the concept in the future.”
Click here to read the article titled, "Monolithic Two-Terminal Perovskite/Perovskite/Silicon Triple-Junction Solar Cells with Open Circuit Voltage >2.8 V".