New Photonics Products this Week |
|
|
355 nm Pulsed UV Fiber Laser for Marking & Medical Applications |
Laser
from MECCO
|
The 3W SMARTMARK UV LASER MARKING MACHINE from MECCO is a UV Fiber Laser that operates at a wavelength of 355 nm. It delivers an output power of 3 W and has a wavelength accuracy of ± 10 nm. This pulsed laser has a beam quality factor (M2) of up to 1.2 and pulse repetition rate of 10 kHz - 300 kHz. It is ideal for marking, medical, electronics & automotive applications. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
1530 nm - 1565 nm, Microprocessor Controlled Supercontinuum Source |
Supercontinuum Source
from Nuphoton Technologies, Inc.
|
The ASE-C0-MR-17-FCA from Nuphoton Technologies, Inc. is a Supercontinuum Source that operates at a wavelength of 1530 nm - 1565 nm. It delivers an output power of +17 dBm with a measurement accuracy of up to +/- 0.5 dB (at 1550 nm) and polarization dependence of less than 0.3 dB. This microprocessor-controlled supercontinuum source supports FC/APC connectors. |
|
Download Datasheet
Product Details | |
|
|
|
975 nm CW Laser Diode for Raman Spectroscopy & Medical Applications |
Laser Diode
from Sheaumann Laser
|
The CMC-975-2000-1 from Sheaumann Laser is a CW Laser Diode that operates at a wavelength of 975 nm. It delivers an output power of 2 W and has a slope efficiency of 0.9 W/A. This multimode laser diode has a beam divergence of 30 degrees (vertical far-field) and 8 degrees (horizontal far-field) at FWHM. It is ideal for Raman spectroscopy, defense, and medical applications. |
|
Download Datasheet
Product Details | |
|
|
|
660 nm Multimode Semiconductor Laser Diode for Scientific Applications |
Laser Diode
from Frankfurt Laser Company
|
The FIDL-50M-660 from Frankfurt Laser Company is a GaInAlP Multi Quantum Well Semiconductor Laser Diode that operates at a wavelength of 660 nm. It delivers a continuous wave output power of 50 mW and has a spectral width (FWHM) of 3 nm - 5 nm. This multimode laser diode is ideal for sensing, scientific, research, optical storage, and industrial measurement applications. |
|
Download Datasheet
Product Details | |
|
|
|
0.66 Megapixel CCD Image Sensor for Illumination Applications |
CCD Image Sensor
from Teledyne Imaging
|
The IC-22-08192 from Teledyne Imaging is a 0.66 Megapixel CCD Image Sensor that has a resolution of 8192 x 80 pixels. It operates at wavelengths of 400 nm - 700 nm (Visible) & 700 nm - 1000 nm (NIR) and has a pixel size of 7 µm x 7 µm. This image sensor has fast line rates up to 40 kHz (with 16 taps) and 21 kHz (with 8 taps). It is ideal for difficult illumination applications. |
|
Download Datasheet
Product Details | |
|
|
Sponsored by OPTOMAN | SUPERHERO TIER OPTICS | We proudly introduce SuperHero Tier products. They possess the best capabilities of OPTOMAN translated into in-stock products. We have put our hearts into developing these products. Their performance is exceptional, far surpassing market standards. Click here to learn more. | | | |
|
|
14.2 Megapixel CMOS Image Sensor for Digital Cameras & Camcorders |
CMOS Image Sensor
from Sharp Devices Europe
|
The RJ53Z1BA0LT from Sharp Devices Europe is a 14.2 Megapixel CMOS Image Sensor that has a resolution of 4352 x 3264 pixels. It has a 1/2.33' optical format that delivers a video frame rate of up to 60 fps (at 1080p). This image sensor has a pixel size of 1.4 µm x 1.4 µm and sensitivity of 380 mV. It has RGB primary color mosaic filters and is ideal for digital cameras and digital camcorders. |
|
Product Details | |
|
|
|
5 µm Pyroelectric Extended Infrared Detector for Gas Sensing Applications |
Pyroelectric Detector
from Broadcom
|
The AFBR-S6EPY32271R from Broadcom is a Pyroelectric Extended Infrared Detector that operates at a wavelength above 5 µm. It has a field of view of 40o and specific detectivity of 2.5 x 108 cm.sqrt(Hz)/W. This thin film pyroelectric detector has a noise-equivalent power of 2.7 x 10-10 W/sqrt(Hz) and is ideal for gas sensing, flame & motion detection, and gesture recognition applications. |
|
Download Datasheet
Product Details | |
|
|
|
25.4 mm UV Fused Silica Lens |
Optical Lens
from OPTOMAN
|
The PCV-F400-UVFS-25.4-CT2.0-AR548-AR548 from OPTOMAN is a UV Fused Silica Lens that has a diameter of 25.4 mm. It has an edge thickness of 2.44 mm and a central thickness of 2 mm. This custom lens has a focal length of 400 mm and clear aperture above 80%. It has a surface quality of 20 - 10 and surface irregularity of up to lambda/6 (at 633 nm). This lens has a radius of curvature of -184.03 mm ± 1% and an LIDT of greater than 0.5 J/cm2. |
|
Download Datasheet
Product Details | |
|
|
|
50.8 mm Dia, VUV Optical Bandpass Filter |
Optical Filter
from eSource Optics
|
The 50161FNB from eSource Optics is a Vacuum UV (VUV) optical bandpass filter that allows transmission at a peak wavelength of 161 nm. It has a bandwidth (FWHM) of 20 nm and wavelength tolerance of ± 2.5 nm. This optical filter has a minimum optical peak transmission of 12% and blocks approximately 10-3 UV through FIR. The edge chamfer of this optical filter measures nearly 0.5 mm x 45 degrees and has a clear aperture of 80% (central). |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
1534 nm Diode-Pumped Fiber Optic Transmitter for Range-Finding Applications |
Fiber Optic Transmitter
from Quantel laser by LUMIBIRD
|
The Firecrest from Quantel laser by LUMIBIRD is a Diode-Pumped Er, Yb:Glass Transmitter that operates at a wavelength of 1534 nm. It delivers a peak power above 35 kW and has a pulse energy of greater than 200 µJ. This fiber optic transmitter has a spectral width of 0.3 nm and divergence of up to 1 mrad. It is ideal for range finding, process control sensing, and survey equipment applications. |
|
Download Datasheet
Product Details | |
|
|
|
1528 nm - 1568 nm, Fiber Optic Receiver for Testing Applications |
Fiber Optic Receiver
from ID Photonics
|
The CO-RX-Cxx-10-FA from ID Photonics are Fiber Optic Receiver that operate at a wavelength of 1528 nm - 1568 nm. They have a responsivity of 0.035 A/W and bandwidths of 18 GHz, 20 GHz, 38 GHz, 40 GHz, 55 GHz & 60 GHz. These coherent fiber optic receivers are ideal for optical frontend for oscilloscopes, reference receivers, and coherent detection DSP design applications. |
|
Download Datasheet
Product Details | |
|
|
|
2 µm - 5 µm, Mid-IR Spectrometers for MIR Spectroscopy Applications |
Spectrometer
from NLIR
|
The NLIR-S2050 from NLIR are Mid-infrared Spectrometers that have an optical bandwidth of 2 µm - 5 µm. They have spectral resolutions of 6 cm-1, 3 cm-1 & 2.5 cm-1 with maximum readout rates of 400 Hz, 1.4E3 Hz & 130E3 Hz respectively. These vertically polarised spectrometers are ideal for optical coating measurement, 80 kHz mid-infrared spectroscopy, and kHz-rate OCT applications. |
|
Download Datasheet
Product Details | |
|
|
|
200 nm - 900 nm, Single Photon Spectrometer |
Spectrometer
from Miftek
|
The SPS-100 from Miftek is a Single Photon Spectrometer that operates at a wavelength of 200 nm - 900 nm. It has a spectral resolution of 1 nm (FWHM) and groove density of 1,200 grooves/mm. This spectrometer has a wavelength resolution of 0.1 nm step and fast scanning speed of 500 nm/s. It includes a GPS-10 sensor unit, GPC-10 counter unit & CS-001 control software and supports FO-1 FC/SMA fiber optical cables. |
|
Download Datasheet
Product Details | |
|