New Photonics Products this Week |
|
|
266/355/532/1064 nm Nanosecond Nd:YAG Lasers for Pumping Applications |
Laser
from Quantel laser by LUMIBIRD
|
The Merion MW HP from Quantel laser by LUMIBIRD are Diode-Pumped Nanosecond Pulsed Nd:YAG Lasers that operate at wavelengths of 1064 nm, 532 nm, 355 nm, and 266 nm. They deliver an output power of up to 100 W (at 1064 nm) and are ideal for material processing, laser ultrasonic, interferometry, LiDAR, LIF, spectroscopy, combustion, OPO pumping, PLD & photochemistry applications. |
|
Download Datasheet
Product Details | |
|
|
|
355 nm UV & Green Hybrid Fiber Laser for Cutting & Drilling Applications |
Laser
from MKS | Spectra-Physics
|
The Quasar UV60-Turbo from MKS | Spectra-Physics is UV & Green Hybrid Fiber Laser that operates at a wavelength of 355 nm. It delivers an output power of greater than 38 W and has a maximum pulse energy above 12 µJ. This laser has a beam-pointing stability of up to ± 25 µrad/°C and is ideal for glass cutting & drilling, LED processing, solar cell processing & scribing MDM polymer applications. |
|
Download Datasheet
Product Details | |
|
|
|
1530 nm - 1565 nm, Microprocessor-Controlled Supercontinuum Source |
Supercontinuum Source
from Nuphoton Technologies, Inc.
|
The ASE-C4-MR-17-2-FCA from Nuphoton Technologies, Inc. is a Supercontinuum Source that operates at a wavelength of 1530 nm - 1565 nm. It delivers an output power of 17 dBm and has a measurement accuracy of less than ± 0.5 dB (at 1550 nm). It has a polarization dependence below 0.3 dB, peak-to-peak spectral flatness of up to 2 dB, and supports FC/APC connectors. |
|
Download Datasheet
Product Details | |
|
|
|
1650 nm DFB Laser Diode for Fiber Optic Sensor Applications |
Laser Diode
from NTT Electronics Corporation
|
The NLK1U5FAAA from NTT Electronics Corporation is a DFB Laser Diode that operates at a wavelength of 1650 nm. It delivers a minimum fiber output power of 15 mW and has a spectral linewidth of 2 MHz. This laser diode has a side mode suppression ratio above 35 dB and is ideal for Near-IR gas analysis, tunable diode laser absorption spectroscopy (TDLAS), and fiber optic sensor applications. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
1.6 Megapixel CMOS Image Sensor for High-End Computer Vision Applications |
CMOS Image Sensor
from STMicroelectronics
|
The VG5661 from STMicroelectronics is a 1.6 Megapixel CMOS Image Sensor that has a resolution of 1464 (H) x 1104 (V) pixels. It has a global shutter in a 1/3” optical format that delivers a frame rate of up to 75 fps. This image sensor has a linear dynamic range of up to 98 dB and 11-bit ADC with digital CDS. It has a pixel size of 3.2 µm x 3.2 µm and is ideal for high-end computer vision applications. |
|
Download Datasheet
Product Details | |
|
|
|
1.3 Megapixel Area Scan CMOS Image Sensors for Imaging Applications |
CMOS Image Sensor
from ams AG
|
The Mira130 from ams AG are 1.3 Megapixel Area Scan CMOS Image Sensors that have a resolution of 1080 (H) x 1280 (V) pixels. They have a global shutter in a 1/4" optical format that deliver a frame rate of up to 120 fps. These image sensors have a pixel size of 2.7 µm x 2.7 µm and are ideal for 3D structured light, 2D NIR imaging, machine vision, barcode scanners & motion monitoring applications. |
|
Download Datasheet
Product Details | |
|
|
|
1550 nm PM Fiber Optic Circulator for Fiber Amplifier & Sensor Applications |
Fiber Optic Circulator
from OEQuest
|
The R2200-P from OEQuest is a Polarisation-Maintaining (PM) Fiber Optic Circulator that operates at a wavelength of 1550 nm. It delivers a peak power of 300 mW and has a wavelength range of ±20 nm. This fiber optic circulator has a minimum polarization extinction ratio of 18 dB and peak isolation of 48 dB. It is ideal for use in fiber amplifiers, fiber sensors, and fiber instrument applications. |
|
Download Datasheet
Product Details | |
|
|
|
1070 nm PM Fiber Optic Circulator for Sensor System Applications |
Fiber Optic Circulator
from Optics Technology
|
The C88 1x2 from Optics Technology is a Polarisation-Maintaining (PM) Fiber Optic Circulator that operates at a wavelength of 1070 nm. It delivers an average power of up to 30 W and has a maximum peak power of 10 kW. This fiber optic circulator has an insertion loss of 0.6 dB (port 2 to port 1) and is ideal for ultra-fast fiber lasers, optical fiber amplifiers, fiber laser & sensor system applications. |
|
Download Datasheet
Product Details | |
|
|
Sponsored by everything PE | |
|
|
Tunable NIR OPO for Remote Sensing & Biotechnology Applications |
Optical Parametric Oscillator
from GWU-Lasertechnik Vertriebsges
|
The versaScan-DPSS from GWU-Lasertechnik Vertriebsges is a Tunable NIR Optical Parametric Oscillator (OPO) that has a tuning range of 660 nm - 1000 nm (signal) and 1140 nm - 2550 nm (idler). It delivers an output energy of 38 mJ (at 750 nm) and is ideal for photoacoustic imaging, remote sensing, LiDAR, vibrational, spectroscopy, medical & biotechnology applications. |
|
Download Datasheet
Product Details | |
|
|
|
1600 nm - 3200 nm, Tunable OPO for Remote Sensing Applications |
Optical Parametric Oscillator
from TOPAG Lasertechnik GmbH
|
The Q-TUNE-HR-I10K from TOPAG Lasertechnik GmbH is a Tunable Optical Parametric Oscillator (OPO) that operates at a wavelength of 1600 nm - 3200 nm. It delivers a pulse energy above 100 µJ (at 1650 nm) and has a linewidth of 20 cm-1 - 100 cm-1. This fiber-coupled OPO is ideal for micromachining, Raman spectroscopy & microscopy, IR spectroscopy, and remote sensing applications. |
|
Download Datasheet
Product Details | |
|
|
|
1.048 Megapixel EMCCD Camera for Fluorescence Imaging Applications |
Scientific & Industrial Camera
from Raptor Photonics
|
The Falcon III EMCCD from Raptor Photonics is a 1.048 Megapixel Frame Transfer Electron Multiplying Charge-Coupled Device (EMCCD) Camera that has a resolution of 1024 (H) x 1024 (V) pixels. It has a pixel size of 10 µm x 10 µm and is ideal for scientific applications such as fluorescence imaging/spectroscopy, hyperspectral imaging, single-molecule detection & solar cell inspection. |
|
Download Datasheet
Product Details | |
|
|
|
632.8 nm He-Ne Laser Interferometer for Thickness Measurement Applications |
Interferometer
from Pratt & Whitney Measurement Systems
|
The LMS200 from Pratt & Whitney Measurement Systems is a He-Ne Laser Interferometer that operates at a wavelength of 632.8 nm. It has a measurement range of up to 200 mm and direct reading range of 200 mm. This interferometeris ideal for the measurement of balls/spheres, plug & pin gauges, film thickness, gauge block stacks, mesh thickness, textiles, and precision parts. |
|
Download Datasheet
Product Details | |
|
|
|
350 nm - 2500 nm, VIS/NIR Portable Spectrometer for Mapping Applications |
Spectrometer
from Malvern Panalytical
|
The Terraspec 4 Hi-Res from Malvern Panalytical is a Portable VIS/NIR Spectrometer that operates at a wavelength of 350 nm - 2500 nm. It has a spectral resolution of 3 nm (at 700 nm) and 6 nm (at 1400/2100 nm). This spectrometer has a wavelength accuracy of 0.5 nm and is ideal for deposit mapping, core logging, clay species delineation and faster vectoring to ore body applications. |
|
Download Datasheet
Product Details | |
|
|
|
190 nm - 430 nm, CCD Spectroradiometer for LED Testing Applications |
Spectrometer
from Gigahertz-Optik
|
The BTS2048-UV from Gigahertz-Optik is a CCD Spectroradiometer that has a spectral range of 190 nm - 430 nm. It has an electronic shutter with an optical bandwidth of 0.8 nm and a peak wavelength of ± 0.05 nm. This spectroradiometer has a resolution of 2048 pixels and pixel resolution of 0.13 nm/pixel. It is ideal for design applications & integration in test systems for front-end and back-end LED testing. |
|
Download Datasheet
Product Details | |
|