New Photonics Products this Week |
|
|
410 nm - 1700 nm, Tunable Picosecond Lasers for Imaging Applications |
Laser
from Spectrolight, Inc.
|
The TLS-BLUE from Spectrolight, Inc. are Tunable Picosecond Lasers that have a tuning range of 410 nm - 1700 nm. They deliver visible output powers of 100 mW, 250 mW, 500 mW, 1 W & 2 W and total output powers of 1 W, 2 W, 3.5 W, 4 W, 7 W & 8 W. These pulsed lasers are ideal for fluorescence microscopy, TCSPC, hyperspectral imaging, machine vision, and sensor applications. |
|
Download Datasheet
Product Details | |
|
|
|
|
|
|
|
1530 nm - 1565 nm, ASE Supercontinuum Source |
Supercontinuum Source
from Nuphoton Technologies, Inc.
|
The ASE-C0-MR-20-FCA from Nuphoton Technologies, Inc. is a Supercontinuum Source that operates at a wavelength of 1530 nm - 1565 nm. It delivers an output power of 20 dBm and has an output power monitoring range of 10 dBm - 21 dBm. This microprocessor-controlled supercontinuum source has a measurement accuracy of less than ± 0.5 dB (at 1550 nm) and polarization dependence below 0.3 dB. It operates in AOPC and ACC modes. |
|
Download Datasheet
Product Details | |
|
|
|
840 nm Fabry-Perot Laser Diode for Spectroscopy Applications |
Laser Diode
from TOPTICA eagleyard
|
The EYP-RWE-0840-06515-1500-SOT02-0000 from TOPTICA eagleyard is a Fabry-Perot Laser Diode that operates at a wavelength of 840 nm. It delivers an output power of 50 mW and has a tuning range of 800 nm - 860 nm. This transverse-electrically polarized laser diode has TEM00 mode with a beam divergence of 10 deg and 23 deg at FWHM. It is ideal for spectroscopy applications. |
|
Download Datasheet
Product Details | |
|
|
|
1310 nm Single Mode Laser Diode for OTDR & LiDAR Applications |
Laser Diode
from SemiNex Corporation
|
The 14BF-125 from SemiNex Corporation is a Single Mode Laser Diode that operates at a wavelength of 1310 nm. It delivers an output power of 0.28 W and has a spectral width of 10 nm. This continuous wave laser diode has a slope efficiency of 0.25 W/A and power conversion efficiency of 10 %. It is ideal for OTDR, LiDAR, free space communications, and network test equipment applications. |
|
Download Datasheet
Product Details | |
|
|
|
InGaAs SWIR Sensor for Industrial NIR Imaging & Agricultural Applications |
SWIR Sensor
from New Imaging Technologies
|
The NSC1601 from New Imaging Technologies is an InGaAs SWIR Sensor that has a resolution of 640 (H) x 512 (V) pixels. It has a global shutter in a 1" optical format that delivers a frame rate of up to 220 fps (full resolution). This VGA SWIR sensor has a pixel size of 15 µm x 15 µm and is ideal for industrial NIR imaging, welding laser instrument, semiconductor inspection, and agricultural applications. |
|
Download Datasheet
Product Details | |
|
|
|
2200 K - 6500 K, LEDs for Indoor Lighting Applications |
LED
from OSRAM
|
The GW PLLRA1.PM from OSRAM are LEDs that have a color temperature of 2200 K - 6500 K. They have a luminous flux of 230 lm - 340 lm and Color Rendering Index (CRI) of 72. These LEDs have a viewing angle of 120o (at 50%) and luminous efficacy of 166 lm/W (at 5000 K). They have a forward voltage of 2.8 V and forward current of 100 mA - 1500 mA. These LEDs are ideal for entertainment, indoor lighting, outdoor & industrial lighting applications. |
|
Download Datasheet
Product Details | |
|
|
|
1030 nm UV-Grade Fused Silica Thin-Film Polarizer |
Polarizer
from OPTOMAN
|
The PP-UVFS-25.4-3.0-TFP4526 from OPTOMAN is a Thin-Film Polarizer that operates at a wavelength of 1030 nm. It has a diameter of 25.4 mm and thickness of 3 mm. This UV-grade fused silica (UVFS) polarizer has a clear aperture above 90 % and surface quality of 20/10 scratch-dig. It has a surface flatness of up to lambda/8 (at 633 nm) and parallelism of less than 3 arcmin. This polarizer has an ion beam sputtering coating and is ideal for Yb:YAG harmonic applications. |
|
Download Datasheet
Product Details | |
|
|
|
Tunable Mid-IR OPO for Remote Sensing & Material Analysis Applications |
Optical Parametric Oscillator
from GWU-Lasertechnik Vertriebsges
|
The basiScan/BB/140 from GWU-Lasertechnik Vertriebsges is a Tunable Mid-IR Optical Parametric Oscillator (OPO) that has a tuning range of 410 nm - 690 nm (signal) and 730 nm - 2500 nm (idler). It delivers an output energy of 25 mJ & 28 mJ (signal) and 42 mJ & 48 mJ (signal + idler). This OPO is ideal for remote sensing, LIF, combustion analysis, and multiphoton interaction applications. |
|
Download Datasheet
Product Details | |
|
|
Sponsored by everything PE | |
|
|
960 nm - 1100 nm, Electro-Optic Phase Modulator for Sensing Applications |
Electro-Optic Phase Modulator
from Beijing Rofea Optoelectronics
|
The Rof-PM-UV series from Beijing Rofea Optoelectronics is an Electro-Optic Phase Modulator that operates at a wavelength of 960 nm - 1100 nm. It has an operating bandwidth of 10 GHz and RF half-wave voltage of 2 V (at 50 KHz) & 3 V (at 10 GHz). This electro-optic phase modulator is ideal for optical fiber sensing, phase delay (shifter), quantum communication and ROF system applications. |
|
Download Datasheet
Product Details | |
|
|
|
1.3 Megapixel CMOS Camera for High-Speed Imaging Applications |
Scientific & Industrial Camera
from Fastec Imaging
|
The Fastec HiSpec 1 from Fastec Imaging is a 1.3 Megapixel CMOS Camera that has a resolution of 1280 x 1024 pixels. It has a global electronic shutter that delivers a frame rate of up to 506 fps (at full resolution) and 112183 fps (at reduced resolution). This camera has a spectral bandwidth of 400 nm - 900 nm and pixel size of 14 µm x 14 µm. It is ideal for high-speed imaging applications. |
|
Download Datasheet
Product Details | |
|
|
|
11 Megapixel CCD Camera for Imaging Applications |
Scientific & Industrial Camera
from IMPERX
|
The B4020 from IMPERX is 11 Megapixel CCD Camera that has a resolution of 4008 (H) x 2672 (V) pixels. It delivers an overlocked frame rate of 6.4 fps and a standard clock frame rate of 4.8 fps. This camera has a pixel size of 9 µm x 9 µm and sensor area of 36.28 mm (H) x 24.19 mm (V). It uses KAI-11002 CCD sensor and has a diagonal size of 43.3 mm. This camera has a shutter speed of 1/100,000 s - 1/5 s and is ideal for imaging applications. |
|
Download Datasheet
Product Details | |
|
|
|
220 nm - 1400 nm, Fluorescence Spectrometer for Anisotropy Applications |
Spectrometer
from PicoQuant
|
The FluoTime 250 from PicoQuant is a Fluorescence Spectrometer that has a spectral range of 230 nm - 1400 nm (PMT) & 220 nm - 890 nm (PMA Hybrid). It has excitation wavelengths of 375 nm - 1200 nm (picosecond pulsed laser) and 255 nm - 600 nm (pulsed LED). This spectrometer is ideal for fluorescence anisotropy & spectra, and fluorescence & phosphorescence lifetime decay applications. |
|
Download Datasheet
Product Details | |
|
|
|
50 m/z - 6000 m/z, Quadrupole Mass Spectrometer for Lipidomics Applications |
Spectrometer
from Thermo Fisher Scientific
|
The Q Exactive Plus Hybrid Quadrupole-Orbitrap from Thermo Fisher Scientific is a Quadrupole Mass Spectrometer that has a mass range of 50 m/z - 6000 m/z. It has a resolving power of 140000 (at 200 m/z) and 280000 (optional) at 200 m/z. This spectrometer has a dynamic range above 5000:1 and mass accuracy below 1 ppm RMS (internal) & 3 ppm RMS (external). It is ideal for lipidomics applications. |
|
Download Datasheet
Product Details | |
|
|
|
|
|